Automatic Swing Barrier for pedestrian access control JKDC-130A

 Description

JKDC-130A Swing barrier is generally used in simple dissuasion level access control of public passages. It is widely used in work attendance checking systems of factories, consumption systems of public institutions, access control of residential estates, ticket exit systems of scenic, sports and other arenas, hand-key management systems of construction sites and so on. The mechanical part of the barrier contains an emergency control device, which allows free passage in case of power fail. The turnstile has different optional configurations for the applications of all building conditions and for the control of all kinds of passage entrance-exits.  Different identification systems (ID card, IC card, bar-code, hand-key, fingerprint, iris, etc.) can be configured into the barrier system. The barrier can be connected to any kinds of controllers and various consumption devices.

  Features

1. SUS304# stainless steel rainproof case

2. LINIX (the best micro-motor brand in China) brush-less DC motor is used and its surface is plated with dichromate;

3. Length of rotating arm: 500mm-900mm
4. Fault detection and alarm functions, easy to use and maintenance.

5. The running status can be programmed and controlled with the built-in keyboard on the main board.

 6. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset).

7. Anti-breakthrough function. The gate is locked automatically until opening signal received.

8. Synchronization functions (for dual gate equipment).
9. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
10. Gate can be set as normally open or normally closed.

11. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
12. Direction can be set as single-direction or bi-direction.

13. The device can be connected to management computer to realize remote control and management.

14. LED direction indicator.
15. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
16. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
17. Counter function (optional).

18. Support infrared photocell for anti-pinch and reset function.

Specifications