JKDC-CN130C swing barrier is generally used for simple discouragement level access control of public passages. It is widely used in factory attendance system, public institution consumption system, community access control, scenic spot, stadium and other places ticket exit system, construction site hand key management system, etc. The mechanical part of the guardrail contains an emergency control that allows free passage in the event of a power outage. The gate has different optional configurations, which can adapt to the application of various building conditions and meet the control of various channel entrances and exits. The barrier gate system can be configured with different identification systems (ID card, IC card, barcode, key, fingerprint, iris, etc.). The barrier can be connected to any type of controller and various consumer devices.
1. SUS304# stainless steel rainproof box
2. Adopt LINIX (the best micro-motor brand in China) brushless DC motor, and the surface is plated with dichromate;
3. Rotating arm length: 500mm-900mm
4. Fault detection and alarm function, easy to use and maintain.
5. The running state can be programmed and controlled through the built-in keyboard of the motherboard.
6. Mechanical anti-pinch function. If the door encounters resistance during the reset process, the motor will automatically stop working within the specified time and reset again after the default delay (until fully reset).
7. Anti-breakthrough function. The door will not lock automatically until the signal to open the door is received.
8. Synchronization function (suitable for double gate equipment).
9. Automatic reset function. If the user fails to pass within the specified time (the default time is 5 seconds), the system will automatically cancel the current user’s permission.
10. The gate can be set as normally open or normally closed.
11. It can be used with a variety of card readers: IC/ID card reader, barcode, fingerprint, etc. (need to be equipped with an access controller)
12. Direction can be set to one-way or two-way.
13. The equipment can be connected to the management computer to realize remote control and management.
14. LED direction indicators.
15. The door can be opened automatically when the power is off, and the door can be closed automatically when the power is on, which meets the fire safety requirements.
16. Alarm functions such as illegal intrusion and reverse intrusion.
17. Counter function (optional).
18. Support infrared photoelectric anti-pinch and reset function.