The full-height sliding door is a high-tech pedestrian access control management product. Compared with tripod gates and wing gates, it is more refined, with more comprehensive functions and higher grades. Mainly used in high-end places, such as residential areas, intelligent buildings, hotels, subways, docks, clubs, etc. Mechanics, electronics, microprocessor control and identification technology are organically integrated in the device. It is very convenient to cooperate with IC cards, ID cards, barcodes, fingerprints and other card-reading identification systems. By matching various identification systems, it can realize intelligent control and management of channels. The equipment adopts reliable safety protection devices, alarm devices and direction indicators.
Its features include:
1. Equipped with fault detection and alarm function, easy to use and maintain
2. The operating state can be controlled by programming the built-in keyboard of the motherboard
3. With mechanical anti-pinch function, when the door encounters resistance during the reset process, the motor will automatically stop working within the specified time, and reset again after the default delay
4. With anti-breakthrough function, the door is automatically locked and unlocked only after the door opening signal appears
5. Synchronization function (double gate equipment)
6. There is an automatic reset function. If the user fails to pass within the specified time (the default time is 5 seconds), the system will automatically cancel the current user’s permission
7. The gate can be set as normally open or normally closed
8. It can be used with IC/ID card reader, barcode, fingerprint and other card readers (need to be equipped with access control controller)
9. You can set the direction as one-way or two-way
10. Equipped with LED direction indicators
11. Comply with fire safety requirements, automatically open when power is off, and automatically close when power is on
12. Equipped with illegal intrusion, reverse intrusion and other alarm functions
13. With counter function (optional)
14. Support infrared photoelectric anti-pinch and reset function
The specifications of the device are as follows:
1. Cabinet size: 1200*300*1000(mm)
2. Standard channel length: 550mm;
3. Weight: 120kg (single motor)
4. Shell material: stainless steel (304, 1.2mm), laser drilling
5. Power supply voltage: AC220±10%V, 50HZ
6. Drive motor: DC motor (24V)
7. Input interface: relay switch signal or 12V level signal or 12V pulse signal with 12V pulse width>100ms, drive current>10mA
8. Normal service life: 4 million times
9. LED indicators: 2
10. Card reading window: The entire upper cover is tempered with 10mm cranberry frosted glass, elegant and luxurious
11. Access ports: 4
12. Traffic speed: 30-40 people/minute
13. Advance time of door opening and closing: 1 second
14. The time required to enter the passing state after power-on: 3 seconds
15. Recovery time after failure: 10 seconds
16. Working environment: indoor/outdoor (with shelter); temperature: -10℃—50℃; relative humidity: ≤90%, no condensation
Reviews
There are no reviews yet.