Automatic Swing Barrier for pedestrian access control JKDC-130A

describe

JKDC-130CN swing gate is generally used for simple discouragement level access control of public passages. It is widely used in factory attendance system, public institution consumption system, community access control, scenic spot, stadium and other places ticket exit system, construction site hand key management system, etc. The mechanical part of the guardrail contains an emergency control that allows free passage in the event of a power outage. The turnstile has different optional configurations, which can adapt to the application of various building conditions and meet the control of various channel entrances and exits. The barrier gate system can be configured with different identification systems (ID card, IC card, barcode, key, fingerprint, iris, etc.). The barrier can be connected to any type of controller and various consumer devices.

feature

1. SUS304# stainless steel rainproof box;
2. Using LINIX brushless DC motor, the surface can be plated with dichromate;
3. Rotating arm length: 500mm-900mm;
4. Fault detection and alarm function, easy to use and maintain;
5. The running state can be programmed and controlled through the built-in keyboard of the motherboard;
6. Mechanical anti-pinch function, if resistance is encountered during the reset process, the motor will automatically stop working within the specified time, and reset again after the default delay (until it is completely reset);
7. Anti-breakthrough function, the door will not be locked automatically until the signal to open the door is received;
8. Synchronization function, suitable for double gate equipment;
9. Automatic reset function, if the user fails to pass within the specified time (the default time is 5 seconds), the system will automatically cancel the current user’s permission;
10. The gate can be set as normally open or normally closed;
11. It can be used with a variety of card readers: IC/ID card reader, barcode, fingerprint, etc. (need to be equipped with an access controller);
12. The direction can be set as one-way or two-way;
13. The equipment can be connected to the management computer to realize remote control and management;
14. LED direction indicators;
15. The door will automatically open when the power is off, and the door will be automatically closed when the power is on, which meets the fire safety requirements;
16. Alarm functions such as illegal intrusion and reverse intrusion;
17. Counter function (optional);
18. Support infrared photoelectric anti-pinch and reset function.